Digital ID View 960H Series Bedienerhandbuch PDF herunterladen (Seite 34)

SITE ID: users must setup SITE ID to match with the ID setting in keyboard, if user wants to use a keyboard to control DVR.

The user also needs to select the KEYBOARD model and BUAD RATE setting.

REMOTE ID: users must setup the REMOTE ID to match with the ID setting in the IR remote controller in order for the

remote to function.

FIRMWARE UPGRADE: Users can easily upgrade the system in “Upgrade Firmware” menu via DVD/CD/USB/FTP server

upon the selection as shown below:

Procedure How to upgrade system firmware by using USB memory stick

1) Insert the USB thumb-drive formatted by FAT32, in any USB port of DVR (compatible with USB 2.0)

2) Once the system detects the thumb-drive, user can see its brand or model name in the “DEVICE”

field after pressing the “SCAN” button.

3) Click “OK” to confirm.

How to upgrade system firmware by using FTP server

1) Select FTP in the drop-down list and type 72.243.193.250 in the HOST ADDRESS (FTP server IP

address) field, username and password is vmax. *The FTP server address is subject to change without

a prior notice.

2) Click ‘CHECK’ button then DVR will detect the latest Firmware version from the FTP server. If there is

a new firmware, DVR will ask you whether you want to upgrade it or not.

3) Click ‘OK’ to confirm it and then click ‘START’ to start upgrading.

Caution

It is recommended to format the HDD after finishing the firmware upgrade because the data recorded by

previous firmware may cause mal-function of DVR due to different format.

It is possible to send the system firmware back to factory default. This may be useful if functionality takes

a step backwards after a system upgrade. It is highly recommended to check all functions and menus

after a firmware upgrade for proper layout and performance.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 64 65

Keine Kommentare

Digital ID View 960H Series Bedienerhandbuch Seite 34