9 2.1.5. MODE (Press once) / FREEZE (Press and hold) Button MODE (Press once): to select the Screen display mode FREEZE (Press and hold):
10 No. Name Description 1 Video-In Camera. (Supports NTSC/PAL) 2 Audio-In Audio input device (with amplifier) 3 Audio-Out Audio output devic
11 2.2.11. Sensor Terminal Block Connect sensors (dry contact type) with each ground (GND) line to “G” pin. 2.2.12. Alarm Terminal Block Conne
12 Procedure 2 ‘REMOTE ID’ Setup in the remote controller 1) Press and hold the ‘ID’ button in the remote controller for more than 5 seconds as s
13 3. Operation 3.1 User Log-in Check the power connection. The system can be used after power-on. The DVR has various setting categories. The
14 3.2 Live Display Mode 3.2.1. Channel Selection Real-time live image can be seen by easy button operation after power-on. The images can be s
15 3.2.2. Icons The live mode display, icons or messages will be indicated on the screen to indicate the system mode or status. Below are the i
16 Red Circle icon button means “instant (emergency) recording”, which is useful to urgently start recording. In emergency recording, the system
17 “Digital Watchdog logo” is shown on the display screen when no camera is connected or camera is disconnected on a certain channel. When a cam
18 3.3 PTZ Operation User can get into PTZ mode by clicking right button of mouse and selecting “PTZ” in the pop-up menu as shown below, or selec
1 Safety Information The safety information is provided for the wellness of the equipment and for the safety of the operator. Please review and
19 Note User will see numeric pad to select “Preset” number. The preset is defined by setting a PTZ protocol in the setting menu. The m
20 3.4 Freeze Mode Press FREEZE button on the front panel or click the right button on the mouse and select the Freeze mode while viewing a liv
21 3.6 Playback of Recorded Video To play a recorded image, press the Play button from the Front Panel or IR Remote Controller. It is easy t
22 3.7 Clean Button during Playback De-interlacing feature is required for smooth playback of video that is recorded by 720x480/576 (D1) resoluti
23 Note The “HELP” button will help you understand how to setup several the user’s manual book. For example, if you need help about how to set
24 3.9 Search Recording Image 3.9.1. Calendar Search The user can select the date and time to search for a certain file within the recorded vid
25 3.9.2. Search Date/Time Enter the desired date and time for the user to playback the recorded video. Use the arrow button to move to each
26 To see a particular event, move the arrow button of the Front Panel or Remote Controller to the desired time range. The followings are the
27 The followings are the categories indicated on the system log viewer. 1. Log by system 2. Log by setup 3. Log by network Note 20 numbers
28 3.10 DST Setting and Screen Saver DST starts at 2:00 local time on 2nd Sunday of March, and ends at 2:00 DST on 1st Sunday of November. During
2 Contents 1. GETTING STARTED ...
29 Click OK to play DST image. Click CANCEL to play Non-DST image. [“DST” image is displayed on screen]
30 4. Setting General setting structure consists of “System”, “Device”, “Record”, “Network”, “Backup” and ‘Quick Setup” as shown below. Main Cla
31 4.1 System The system menu button is selected by clicking “TOOL” on the menu bar or the right click pop-up menu. Users can move mouse pointer
32 Users can name a site by using the virtual keyboard as shown below; In “DATE/TIME SET”, user can activate DST (Daylight Saving Time); sel
33 SITE ID: users must setup SITE ID to match with the ID setting in keyboard, if user wants to use a keyboard to control DVR. The user also needs
34 In “Display Setting”, user can set sequence dwell time, spot-out dwell time, the spot-out channel, camera pop-up and OSD as below picture. Us
35 4.1.2. User Master user of this system is always Admin with factory default of No password. Admin must change the password of the DVR for extr
36 4.1.3. Export/Import Users can copy and paste the system configuration values in this menu. “Export” allows the user to copy the settings for t
37 On the DVR system, DVR HEALTH CHECK is represented in % sign as shown below. It also indicates the lifetime and the temperature of the hard disk
38 4.1.5. Factory Default With authorized password, users can get the system back to factory default configuration. Note Upon clicking “OK”
3 1. Getting Started 1.1 Checking Supplied Items Make sure that you have following items supplied with your DVR. vendor immediately. Keep the pa
39 4.2 Device 4.2.1. Camera Users can easily move to the “Device” menu by selecting the icon in right up side of the menu screen. “Covert” is
40 4.2.3. Sensor ON/OFF Turn on or turn off the sensor CAMERA Select the associated camera OUT Select the associated alarm output C
41 COPY SETTINGS Upon pressing Copy Settings button, Copy Settings popup will appear. In this popup, choose the sensor the user wants to copy f
42 4.2.4. Motion Alarm Select Motion alarm to record only when motion detection is triggered by DVR S/W upon user’s defined motion area. The syst
43 4.2.6. PTZ Full control of PTZ camera is available in this menu. For details, please refer to Section 3.3 PTZ Operation. “M” (Depending o
44 4.3 Record 4.3.1. Camera “On/Off” switches “recording” on and off in each channel. If recording is not required on the selected channels, ev
45 will be deleted by the system. On August 21, the system will keep video from August 12 to August 21 for 10days. Note The storage capacity f
46 4.3.2. Schedule Set the recording schedule for each camera. First, select the camera to set a schedule, or “All”. Recording can be set by each
47 Note If the recording schedule is set to “CONT + MOT” or “MOT + SENS”, then the system records by continuous or motion detection mode in nor
48 4.4 Network 4.4.1. Network The system has built-in web server. Network Type Select network connect type. Select either LAN for fixed (Stati
4 1.2 Connecting Peripheral Device This section describes how to connect efficiently to peripheral devices with the DVR. Install the DVR on fl
49 UPnP (Universal Plug and Play) and Auto Private IP Setup (NAT Traversal) UPnP stands for Universal Plug and Play, which is a relatively new tec
50 4.4.2. DDNS DDNS is to use Dynamic IP server is managed by Digital-Watchdog The User has to tick on “Use DDNS” check box to use it. DDNS Serv
51 -Technical Tips- 1. If your DW-VMAX is connected behind the router be sure to login to your router to open TCP/IP:port,Mo
52 The Setting in Advanced Client Software In “Setting” in the “Option” menu in the Advanced Client Software, users need to make sure to enter the
53 The Setting in Web browser User can just type the DVR Name + cctv-link.net, for example, http://mydvr.cctv-link.net.
54 4.4.4. Notification Remote Notify
55 Note Configuration first priority is always for “SCHEDULE” of the “RECORD”. Thus, the system will not email alarm message upon motion or sen
56 4.5 Backup 4.5.1. Manual Backup Users can archive a video clip recorded for a certain period on a selected channel or channels as shown belo
57 4.5.2. Backup Video Retrieve After archiving, there will be multiple files created as seen in the picture below if “ADD VIEWER” was selected.
58 Users can check or uncheck “De-interlace” or verify video resolution by bringing up a popup using right mouse button. Users must select “Audio
5 1.3 System Startup and Shutdown 1.3.1. System Startup After connecting peripheral devices such as cameras, monitors and a mouse to the DVR, p
59 4.6 Quick Setup Quick Setup helps user make simple configuration for recording resolution, entire recording speed by frame, recording mode, an
60 5. Web Surveillance The system has a built-in web server. Users can stay always connected to the system using an ordinary web-browser over a n
61 After logging in with the right ID and password, users can make various configuration changes in the Web Configuration window seen below. This
62 Note <System Reboot> enables user to reboot the system without any change to the setup. User can use this function when the network is di
63 User can monitor live video in 1, 4, 9 or 16 screen modes. If user wants to see single channel in full screen, then user can make double
64 5.4 Web Playback Users can remotely playback the DVR images by clicking “SEARCH” button in the top-right corner of the window. In order to con
6 1.3.2. System Shutdown To turn off the DVR, Click “MENU” button and then click “SHUTDOWN” and enter your password in the menu (The default is
7 2. Explanation for Each Function 2.1 Front Panel [DW-VMAX 4 Compact Case (270 x 71 x 215 mm)] [DW-VMAX 8/16 Case (360 x 66 x 380mm)]
8 2.1.1. DIRECTION Button 1) Live Display & Playback Mode User can change channel number by using Left & Right arrow button. U
Kommentare zu diesen Handbüchern